推荐:《php8教程》
从零搭建php环境-php8
一、下载
1、https://www.php.net/distributions/php-8.0.0.tar.gz
下载到本地,文件传输上传到 /usr/local/src/
2、wget -P /usr/local/src/ https://www.php.net/distributions/php-8.0.0.tar.gz
二、解压、编译、安装
1、解压缩
> cd /usr/local/src/ > tar xzf php-8.0.0.tar.gz > cd php-8.0.0
2、配置编译参数,参考https://www.php.net/manual/zh/configure.about.php选择自己需要的选项
./configure --prefix=/usr/local/php8 --with-config-file-path=/usr/local/php8/etc --with-fpm-user=www --with-fpm-group=www --with-curl --with-openssl --with-mysqli --with-pdo-mysql --with-iconv --with-mhash --with-zlib --enable-mbstring --enable-gd --enable-gd-jis-conv --enable-sockets --enable-fpm --enable- --enable-xml --enable-pdo --enable-cli --enable-pcntl --enable-soap --enable-opcache --enable-fileinfo --disable-rpath --enable-mysqlnd --with-zip --enable-simplexml --with-libxml --with-sqlite3 --with-pdo-sqlite --enable-phar --enable-tokenizer --enable-cgi
问题1:
configure: error: Package requirements (libxml-2.0 >= 2.9.0) were not met: Package 'libxml-2.0', required by 'virtual:world', not found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBXML_CFLAGS and LIBXML_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
问题1解决:
> yum install libxml2-devel
问题2:
configure: error: Package requirements (sqlite3 > 3.7.4) were not met:
问题2解决:
> yum install sqlite-devel
问题3:
configure: error: Package requirements (libcurl >= 7.29.0) were not met:
问题3解决:
> yum install libcurl-devel
问题4:
configure: error: Package requirements (libpng) were not met:
问题4解决:
> yum install libpng libpng-devel
问题5:
configure: error: Package requirements (oniguruma) were not met:
问题5解决:
> cd /usr/local/src/ > wget http://ftp.altlinux.org/pub/distributions/ALTLinux/Sisyphus/x86_64/RPMS.classic/liboniguruma5-6.9.6-alt1.x86_64.rpm -O liboniguruma5-6.9.6-alt1.x86_64.rpm > rpm -ivh liboniguruma5-6.9.6-alt1.x86_64.rpm > wget http://ftp.altlinux.org/pub/distributions/ALTLinux/Sisyphus/x86_64/RPMS.classic/liboniguruma-devel-6.9.6-alt1.x86_64.rpm -O liboniguruma-devel-6.9.6-alt1.x86_64.rpm > rpm liboniguruma-devel-6.9.6-alt1.x86_64.rpmcli
问题6:
configure: error: Package requirements (libzip >= 0.11 libzip != 1.3.1 libzip != 1.7.0) were not met:
问题6解决:
> yum install libzip libzip-devel
配置编译参数成功
+--------------------------------------------------------------------+ | License: | | This software is subject to the PHP License, available in this | | distribution in the file LICENSE. By continuing this installation | | process, you are bound by the terms of this license agreement. | | If you do not agree with the terms of this license, you must abort | | the installation process at this point. | +--------------------------------------------------------------------+ Thank you for using PHP.
3、编译源码
> make -j2 # 这里是依赖系统cpu核心数进行编译,对性能有一定提升,通常利用核心数不要超过一半,
4、安装
make install
安装成功
[root@54skyer php-8.0.0]# make install Installing shared extensions: /usr/local/php8/lib/php/extensions/no-debug-non-zts-20200930/ Installing PHP CLI binary: /usr/local/php8/bin/ Installing PHP CLI man page: /usr/local/php8/php/man/man1/ Installing PHP FPM binary: /usr/local/php8/sbin/ Installing PHP FPM defconfig: /usr/local/php8/etc/ Installing PHP FPM man page: /usr/local/php8/php/man/man8/ Installing PHP FPM status page: /usr/local/php8/php/php/fpm/ Installing phpdbg binary: /usr/local/php8/bin/ Installing phpdbg man page: /usr/local/php8/php/man/man1/ Installing PHP CGI binary: /usr/local/php8/bin/ Installing PHP CGI man page: /usr/local/php8/php/man/man1/ Installing build environment: /usr/local/php8/lib/php/build/ Installing header files: /usr/local/php8/include/php/ Installing helper programs: /usr/local/php8/bin/ program: phpize program: php-config Installing man pages: /usr/local/php8/php/man/man1/ page: phpize.1 page: php-config.1 /usr/local/src/php-8.0.0/build/shtool install -c ext/phar/phar.phar /usr/local/php8/bin/phar.phar ln -s -f phar.phar /usr/local/php8/bin/phar Installing PDO headers: /usr/local/php8/include/php/ext/pdo/
5、添加环境变量
> vim /etc/profile # 在文件末尾加入 # PATH=$PATH:/usr/local/php8/bin/ # export PATH # :wq 保存并退出 > source /etc/profile # 立刻生效配置 > php -v # 获得如下信息 php -v PHP 8.0.0 (cli) (built: Dec 15 2020 02:46:59) ( NTS ) Copyright (c) The PHP Group Zend Engine v4.0.0-dev, Copyright (c) Zend Technologies
6、获取默认配置
// 复制php.ini到编译配置参数指定的目录。php.ini在解压的源码目录里 > cp /usr/local/src/php-8.0.0/php.ini-production /usr/local/php8/etc/php.ini // 复制一份php-fpm的配置模版文件到同级目录 方便备份和修改 > cp /usr/local/php8/etc/php-fpm.conf.default /usr/local/php8/etc/php-fpm.conf // 复制一份php-fpm的扩展配置模板文件到同级目录 方便备份和修改 > cp /usr/local/php8/etc/php-fpm.d/www.conf.default /usr/local/php8/etc/php-fpm.d/www.conf // 复制开启自起脚本到系统启动自动加载脚本目录。fpm/init.d.php-fpm在解压的源码目录里 > cp /usr/local/src/php-8.0.0/sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm
7、开机自启动
设置命令可被执行
> chmod +x /etc/init.d/php-fpm # 添加可执行权限
检验自启动脚本
> service php-fpm start # 检验服务启动 > service php-fpm stop # 检验服务关闭 // 均正常提示 > chkconfig php-fpm on # 设置开机自动执行php-fpm开机自启动脚本 > reboot # 重启,ssh重连 # 重启后 [root@54skyer ~]# netstat -ntlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1097/nginx: master tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1061/sshd tcp 0 0 0.0.0.0:16379 0.0.0.0:* LISTEN 1090/redis-server 0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1083/php-fpm: maste
7、额外说明
关于配置文件的一些说明 参考:https://www.cnblogs.com/xiaozong/p/5724984.html
php-fpm.conf是PHP-FPM特有的配置文件
php.ini是所有php模式中必须的配置文件
两者的区别是,php-fpm.conf是PHP-FPM进程管理器的配置文件,php.ini是PHP解析器的配置文件
有的PHP版本的配置文件路径中还有/fpm.d/www.conf配置文件
这是php-fpm.conf配置的文件的扩展文件,可以打开php-fpm.conf文件查看
; include=fpm.d/*.conf
我们可以使用php-fpm.conf配置慢日志
我们是可以开启慢日志功能的。
slowlog = /usr/local/var/log/php-fpm.log.slow
request_slowlog_timeout = 5s
以上就是【教你从零搭建php8环境】的详细内容。
想要了解更多内容,请持续关注码农资源网,一起探索发现编程世界的无限可能!
本站部分资源来源于网络,仅限用于学习和研究目的,请勿用于其他用途。
如有侵权请发送邮件至1943759704@qq.com删除